migrate #

migrate is acra-keys subcommand used for migration from keystore type v1 to v2.

Command line flags #

migrate subcommand contains general cli flags with prefixes src and dst, where dst_* flags are related to new keystore (destination) and src_* to old one (source).

General flags #

• --{src|dst}_keystore=<v1|v2> 🔴

  Set keystore format. Read more about keystore versions.

• --dry_run

  Try migration without writing to the output keystore.

• --force

  Write to output keystore even if it exists.

Storage destination #

Filesystem #

• --{src|dst}_keys_dir=<path> 🔴

  Path to keystore folder.

• --{src|dst}_keys_dir_public=<path>

  Path to key directory for public keys.

Redis #

• --{src|dst}_redis_db_keys=<number>

  Redis database number to use. Default is 0.

• --{src|dst}_redis_host_port=<host:port>

  Address of Redis database to use as keystore. If not specified, Redis is not used.

• --{src|dst}_redis_password=<password>

  Password to Redis database.

• --{src|dst}_redis_tls_client_auth=<mode>

  Set authentication mode that will be used for TLS connection with Redis.

  • 0 — do not request client certificate, ignore it if received;
  • 1 — request client certificate, but don’t require it;
  • 2 — expect to receive at least one certificate to continue the handshake;
  • 3 — don’t require client certificate, but validate it if client actually sent it;
  • 4 — (default) request and validate client certificate.

  These values correspond to crypto.tls.ClientAuthType.

• --{src|dst}_redis_tls_client_ca=<filename>

  Path to additional CA certificate for Redis' certificate validation. Empty by default.

• --{src|dst}_redis_tls_client_cert=<filename>

  Path to TLS certificate presented to Redis (acra-keys works as “client” when communicating with Redis). Empty by default.

• --{src|dst}_redis_tls_client_key=<filename>

  Path to private key of the TLS certificate presented to Redis. Empty by default.

• --{src|dst}_redis_tls_client_sni=<SNI>

  Expected Server Name (SNI) of the Redis instance. Will be used --{src|dst}_redis_host_port value if is empty. Empty by default.

• --{src|dst}_redis_tls_crl_client_cache_size=<count>

  How many CRLs to cache in memory in connections to Redis. Use 0 to disable caching. Maximum is 1000000. Default is 16. Cache uses LRU policy.

• --{src|dst}_redis_tls_crl_client_cache_time=<seconds>

  How long to keep CRLs cached, in seconds for connections to Redis. Use 0 to disable caching. Maximum is 300 seconds. Default is 0.

• --{src|dst}_redis_tls_crl_client_check_only_leaf_certificate={true|false}

  This flag controls behavior of validator in cases when Redis' certificate chain contains at least one intermediate certificate.

  • true — validate only leaf certificate
  • false — (default) validate leaf certificate and all intermediate certificates

  This option may be enabled in cases when intermediate CAs are trusted and there is no need to verify them all the time. Also, even if this flag is false but there is no CRL’s URL configured and there is no CRL’s URL in intermediate CA certificates, these intermediate CAs won’t be validated since we don’t know which CRLs could be used for validation.

• --{src|dst}_redis_tls_crl_client_from_cert=<policy>

  How to treat CRL’s URL described in a certificate from Redis server

  • use — try URL(s) from certificate after the one from configuration (if set)
  • trust — try first URL from certificate, if it does not contain checked certificate, stop further checks
  • prefer — (default) try URL(s) from certificate before the one from configuration (if set)
  • ignore — completely ignore CRL’s URL(s) specified in certificate

  “URL from configuration” above means the one configured with --redis_tls_crl_client_url flags.

• --{src|dst}_redis_tls_crl_client_url=<url>

  CRL’s URL for outcoming TLS connections to Redis. Empty by default.

• --{src|dst}_redis_tls_enable=<true|false>

  Turns on/off TLS for connection with Redis to --{src|dst}_redis_host_port endpoint.

  • true — turns on
  • false — (default) turns off.

• --{src|dst}_redis_tls_ocsp_client_check_only_leaf_certificate={true|false}

  This flag controls behavior of validator in cases when Redis' certificate chain contains at least one intermediate certificate.

  • true — validate only leaf certificate
  • false — (default) validate leaf certificate and all intermediate certificates

  This option may be enabled in cases when intermediate CAs are trusted and there is no need to verify them all the time. Also, even if this flag is false but there is no OCSP’s URL configured and there is no OCSP’s URL in intermediate CA certificates, these intermediate CAs won’t be validated since we don’t know whom to ask about them.

• --{src|dst}_redis_tls_ocsp_client_from_cert=<policy>

  How to treat OCSP server URL described in a certificate from Redis server

  • use — try URL(s) from certificate after the one from configuration (if set)
  • trust — try URL(s) from certificate, if server returns “Valid”, stop further checks
  • prefer — (default) try URL(s) from certificate before the one from configuration (if set)
  • ignore — completely ignore OCSP’s URL(s) specified in certificate

  “URL from configuration” above means the one configured with --{src|dst}_redis_tls_ocsp_client_url flags, see Configuring & maintaining > TLS > OCSP.

• --{src|dst}_redis_tls_ocsp_client_required=<policy>

  How to handle situation when OCSP server doesn’t know about requested Redis' certificate and returns “Unknown”.

  • denyUnknown — (default) consider “Unknown” response an error, certificate will be rejected
  • allowUnknown — reverse of denyUnknown, allow certificates unknown to OCSP server
  • requireGood — require all known OCSP servers to respond “Good” in order to allow certificate and continue TLS handshake, this includes all URLs validator can use, from certificate (if not ignored) and from configuration

• --{src|dst}_redis_tls_ocsp_client_url=<url>

  OCSP service URL for outgoing TLS connections to check Redis' certificates. Empty by default.

Keystore #

• --{src|dst}_keystore_encryption_type=<strategy>

  Keystore encryption strategy. Currently supported strategies:

  • env_master_key (Default) - Keystore using Acra Master Key, loaded from ENV (ACRA_MASTER_KEY) variable;
  • vault_master_key - Keystore using Acra Master Key, loaded from Hashicorp Vault
  • kms_encrypted_master_key - Keystore using Acra Master Key, loaded from ENV ACRA_MASTER_KEY variable and decrypted via KMS key-encryption key.
  • kms_per_client - Keystore using KMS for decryption Acra keys per ClientID and ZoneID (zones are deprecated since 0.94.0, will be removed in 0.95.0). Create new KMS zone key-encryption key if not present on KMS.

KMS #

• --{src|dst}_kms_type=<type>

  Specify your KMS. Currently supported KMS types:

  • aws - AWS Key Management Service

• --{src|dst}_kms_credentials_path=<filepath>

  A path to a file with KMS credentials JSON format.

  Example of KMS config:

• AWS:

     {"access_key_id":"<access_key_id>","secret_access_key":"<secret_access_key>","region":"<region>"}
  

Note: Should be provided only with --keystore_encryption_type=<kms_encrypted_master_key|kms_per_client> flags.

HashiCorp Vault #

• --{src|dst}_vault_connection_api_string=<url>

  Connection string (like http://x.x.x.x:yyyy) for loading ACRA_MASTER_KEY from HashiCorp Vault. Default is empty (ACRA_MASTER_KEY environment variable is expected).

• --{src|dst}_vault_secrets_path=<path>

  KV Secret Path for reading ACRA_MASTER_KEY from HashiCorp Vault. Default is secret/.

• --{src|dst}_vault_tls_transport_enable=<true|false>

  Turns on/off TLS for connection with vault to --vault_connection_api_string endpoint.

  • true — turns on
  • false — (default) turns off.

• --{src|dst}_vault_tls_client_auth=<mode>

  Set authentication mode that will be used for TLS connection with Vault.

  • 0 — do not request client certificate, ignore it if received;
  • 1 — request client certificate, but don’t require it;
  • 2 — expect to receive at least one certificate to continue the handshake;
  • 3 — don’t require client certificate, but validate it if client actually sent it;
  • 4 — (default) request and validate client certificate.

  These values correspond to crypto.tls.ClientAuthType.

• --{src|dst}_vault_tls_ca_path=<filename>

  Path to CA certificate for HashiCorp Vault certificate validation. Default is empty (deprecated since 0.94.0, use {src|dst}_vault_tls_client_ca instead).

• --{src|dst}_vault_tls_client_ca=<filename>

  Path to additional CA certificate for Vault certificate validation. Empty by default.

• --{src|dst}_vault_tls_client_cert=<filename>

  Path to TLS certificate presented to Vault (acra-keys works as “client” when communicating with Vault). Empty by default.

• --{src|dst}_vault_tls_client_key=<filename>

  Path to private key of the TLS certificate presented to Vault. Empty by default.

• --{src|dst}_vault_tls_client_sni=<SNI>

  Expected Server Name (SNI) of the Vault instance. Will be used --vault_connection_api_string value if is empty. Empty by default.

• --{src|dst}_vault_tls_crl_client_cache_size=<count>

  How many CRLs to cache in memory in connections to Vault. Use 0 to disable caching. Maximum is 1000000. Default is 16. Cache uses LRU policy.

• --{src|dst}_vault_tls_crl_client_cache_time=<seconds>

  How long to keep CRLs cached, in seconds for connections to Vault. Use 0 to disable caching. Maximum is 300 seconds. Default is 0.

• --{src|dst}_vault_tls_crl_client_check_only_leaf_certificate={true|false}

  This flag controls behavior of validator in cases when Vault certificate chain contains at least one intermediate certificate.

  • true — validate only leaf certificate
  • false — (default) validate leaf certificate and all intermediate certificates

  This option may be enabled in cases when intermediate CAs are trusted and there is no need to verify them all the time. Also, even if this flag is false but there is no CRL’s URL configured and there is no CRL’s URL in intermediate CA certificates, these intermediate CAs won’t be validated since we don’t know which CRLs could be used for validation.

• --{src|dst}_vault_tls_crl_client_from_cert=<policy>

  How to treat CRL’s URL described in a certificate from Vault server/agent

  • use — try URL(s) from certificate after the one from configuration (if set)
  • trust — try first URL from certificate, if it does not contain checked certificate, stop further checks
  • prefer — (default) try URL(s) from certificate before the one from configuration (if set)
  • ignore — completely ignore CRL’s URL(s) specified in certificate

  “URL from configuration” above means the one configured with --vault_tls_crl_client_url flags.

• --{src|dst}_vault_tls_crl_client_url=<url>

  CRL’s URL for outcoming TLS connections to Vault. Empty by default.

• --{src|dst}_vault_tls_ocsp_client_check_only_leaf_certificate={true|false}

  This flag controls behavior of validator in cases when Vault certificate chain contains at least one intermediate certificate.

  • true — validate only leaf certificate
  • false — (default) validate leaf certificate and all intermediate certificates

  This option may be enabled in cases when intermediate CAs are trusted and there is no need to verify them all the time. Also, even if this flag is false but there is no OCSP’s URL configured and there is no OCSP’s URL in intermediate CA certificates, these intermediate CAs won’t be validated since we don’t know whom to ask about them.

• --{src|dst}_vault_tls_ocsp_client_from_cert=<policy>

  How to treat OCSP server URL described in a certificate from Vault server.

  • use — try URL(s) from certificate after the one from configuration (if set)
  • trust — try URL(s) from certificate, if server returns “Valid”, stop further checks
  • prefer — (default) try URL(s) from certificate before the one from configuration (if set)
  • ignore — completely ignore OCSP’s URL(s) specified in certificate

  “URL from configuration” above means the one configured with --vault_tls_ocsp_client_url flags.

• --{src|dst}_vault_tls_ocsp_client_required=<policy>

  How to handle situation when OCSP server doesn’t know about requested Vault certificate and returns “Unknown”.

  • denyUnknown — (default) consider “Unknown” response an error, certificate will be rejected
  • allowUnknown — reverse of denyUnknown, allow certificates unknown to OCSP server
  • requireGood — require all known OCSP servers to respond “Good” in order to allow certificate and continue TLS handshake, this includes all URLs validator can use, from certificate (if not ignored) and from configuration

• --{src|dst}_vault_tls_ocsp_client_url=<url>

  OCSP service URL for outgoing TLS connections to check Vaults' certificates. Empty by default.

Note: Should be provided only with --keystore_encryption_type=<vault_master_key> flag.

🔴 - flags required to be specified.

Note: You can find out an example how to use acra-keys migrate in keystore versions section.